Feed-water system for pure water production

PRODUCTION PROCESS OF PURE WATER BOTTLED, WATER TANK

Source water is stored in the reservoir (large enough)
+ Heavy equipment KL: Here under the effect of the layer of filter materials to remove impurities, suspended particles while processing part of iron and Mn in water source, and thanks to the feature Particularly for Cozoset grains for water. Then put into activated carbon filter
+ Carbon treatment equipment: There is the process of absorbing the toxins in the water while removing the color, odor, taste and oxidants, the organic substances in the water are pre-treatment equipment. Material for rear serial devices.
+ Water softeners: Water after the activated carbon treatment equipment is brought to the soft-handling equipment. Here water-hardening ingredients such as Ca, Mg ... are retained at the same time some other cations are also retained. The material is processed after one cycle of operation to be saturated and restored to its original state by reverting it to an automatic valve. Water after softening hardness <17mg / liter is the basis of operating water purification membrane reverse osmosis (RO)
+ Refining equipment: Here we choose the filter size 5 allows the complete removal of suspended particles, scale larger than 5m. Reduced sedimentation due to sedimentation is the basis for the operation of reverse osmosis membranes.
+ Reverse osmosis equipment: This is the most important equipment that determines the quality of finished water. Here, under the effect of osmotic pressure (created by high pressure pumps), the reverse osmosis membrane removes the metal ions present in the water while treating up to 90 percent of the microbes in the water. Make high purity water. The finished water quality depends on the osmotic pressure and water quality after passing through pre-treatment equipment. The RO membrane is the most effective and the highest quality when the water passes through the membrane must meet the following requirements:
• Water hardness as small as possible (<17mg / l)
• No oxidizing agents
• Have as much transparency as possible and limit the bacteria on the membrane because when the machine is stopped for a long time, the bacteria will destroy the membrane. That is the basis for our selection of pre-treatment equipment for RO as above. Water after RO is put into finished water tank.
+ Level 1 sterilization: The water after the RO ensures complete physical and chemical treatment of water treated with OZONE. The effect of OZONE allows the complete removal of the remaining bacteria in the water to ensure absolute sterilization for finished water. OZONE is a safe and effective sterilization technology for processing and handling food and beverages.
+ Water tank finished products: Used to store water through RO and sterilized treatment
+ Level 2 pumps: The task of draining water from the final product tank is pushed through the pasteurization system level 2.
Grade 2 pasteurization equipment: Used by UV-ray technology to treat microorganisms in water without altering water quality.
Water Filtration Device: Water after being treated with OZONE, UV dead bacteria, their bodies are bonded together to form suspended membranes of size in the finished water tank. Thus, before reaching the finished product point, it is passed through a 0.2 micron filter. Allows the complete removal of these bacteria. Ensure the finished product is of the highest quality.