FloMag pH raising beads for water - USA Technology

FloMag pH raising beads for water - USA Technology

The FloMag pH raising beads are a material used in water filtration technology to balance the pH of water. Currently on the market there are two popular types of pH raising beads: Corosex beads from the US and LS beads. The pH of water affects human health, so using pH raising beads helps maintain the appropriate pH of domestic water. Technology for producing pH raising beads from the US ensures quality and safety for users.

Technical specifications: floMag pH lifting beads (Detailed specification file)

Color: gray white
Density: 75lbs./cu. ft.
Size: 1.27 mm
Ingredients – MgO: 97%
Uses: increase the pH of water
Origin: USA
Unit: how much
Density: 1400 kg/m3
Specification: 22.68 kg/bag

Operating conditions:

Should be used in combination with other layers of filter materials.
Source water pH: 4.5-6.0
Material depth: 24-30 in.
Clearance: 50% of material depth
Backwash periodically to avoid material adhesion
Backwash rate: 10-12 gpm/sq. ft.
Flow rate: 5-6 gpm/sq. ft but can be adjusted to accommodate local conditions.
Use up to 100 mg/L

Advantages of flomag pH lifting beads

Flomag pH raising beads can replace other types of beads such as ls, corosex...
Flomag pH raising beads have a low price compared to other imported chemicals, but have a long usage time.
Helps add minerals to water, using pH raising beads helps stabilize the pH in water without increasing too high.
When put into use, the structure of the filter material layer does not change.

Instructions for using pH raising beads

When put into use, there must be a layer of lining material above the pH raising beads, so Flomag beads should be arranged at the top of the water filtration system.
The thickness of the pH raising beads is from 0.4 - 0.8 m depending on the pH of the input water source
Flomag pH raising beads do not need to be reconstituted after a period of use as they will gradually wear out, so add beads to keep the water source at a stable pH.
Flomag pH raising beads should be used when the input water source has a pH of 4.0 - 6.0
To ensure good performance, the filter should be operated at a speed of 5 - 15 m/h.